After Care

System X® coatings are strong enough to resist almost anything but we have a few tips to keep your finish looking great!

BUY RENEW™ NOW GET AN INSTALL QUOTE
image description

System X® After Care and
Washing Techniques

Congratulations on your brand new System X® coating. On this page we will discuss how to care for your new coating.

System X® is designed to protect your factory clear coat, to provide a protective shield against the elements, and to keep your vehicle looking new always. To maximize the effects of System X® and to ensure your investment is long-lasting, a few basic maintenance steps should be taken. With simple care, your coating will reward you for years to come.

Ceramic Spray Coating or Topper

Slicker & longer lasting than any other spray ceramic! Use alone or as a topper for your warranted ceramic coating.

image description
Buy Renew™ Online
image description

Curing Process

A new System X® coating will take about 2-3 days to cure to its full strength. During that time, some precautions should be taken.

Curing time is 2-3 days depending on environmental conditions such as humidity and temperature. Take special care during this time period. The coating will help prevent your clear coat from getting water spots as it is hydrophobic, however, it can still get hard water spots. Be especially diligent during the curing process to prevent water spots, which may be costly to remove.

During the curing process avoid:

  • Parking under trees especially if there are shedding. You don’t want tree sap on a fresh coating.
  • Allowing bird droppings, sap or pollen to sit on the car and bake in the sun.
  • Washing or abrading the paint.

If you notice that your car gets water spots, bird droppings, bugs, tree sap, or other contaminants during the first few days, immediately remove it following our care instructions. Keep in mind the coating is still curing. Be gentle when working on the paint.

image description

Car Washing Techniques

  • Wash on a bi-weekly basis to avoid excessive contamination build up.
  • Avoid washing in direct sunlight to minimize streaking and water spotting.
  • Wash from the top down leaving the dirtiest sections for last to avoid cross contamination.
  • Use the “two bucket” method – one bucket for rinsing your sponge/mitt and one for soapy water.
  • Use separate soap and sponge/mitt for wheels.

Drying

  • Always dry completely and never leave to air-dry. Tap water contains minerals that may leave deposits creating water spots.
  • Use quality microfiber towels for best results and avoid aggressive wiping, allowing the material to absorb the water.
image description
image description

Waterspot and dropping Removal

  • Never use aggressive products to polish the coating or remove surface contamination.
  • Never use excessive force to remove water spots.
  • Bird droppings, tar, sap, etc. should be removed as soon as possible to avoid temporary staining or hardening on the coating. Any staining left behind from the bird droppings will break down over a few days without affecting the coating.

System X® Interior Maintenance

  • For best results, clean all leather/vinyl surfaces bi-weekly.
  • Vacuum carpets regularly.
  • Immediately wipe off spills on leather, vinyl, or fabric.
  • Immediately absorb and clean stains on carpet.
image description

What Not to Do and What to Do

Don’t

Car washes:

  • Automatic towel wash
  • Use dirty brush

Home Washing:

  • Don’t wash in direct sun
  • Don’t wax or polish
  • Don’t use abrasive towels
image description
image description
image description

Swipe

Do

Car washes:

  • Hand Wash
  • Touchless Wash

Home Washing:

  • Mild Car wash soap
  • Microfiber wash & dry
  • Wash in shade
CONTACT US

A Few Last Care Tips
After Curing is Complete

Removing Contaminants

System X® is extremely slick, this means most things will dissolve and be pulled off by System X’s self-cleaning effect. Use water or a little vinegar to remove bird droppings, bugs, and tree sap. Followed by wiping it off with a soft edge-less microfiber towel.

Washing schedule

For best results the car should be washed on a bi-weekly basis to avoid excessive contamination build-up. Use only recommended mild soaps. Avoid high volume brush style car washes, high PH detergent style cleaners, and bug/tar removers. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the top down leaving the dirtiest sections for last to avoid cross-contamination. Use separate soap.

Washing methods

Standard home washing

  • Use a foam gun (optimal) or microfiber wash mitt to soap down the car. Rinse it off with a pressure washer (optimal) or hose. Dry with clean microfiber towels.

Spray ‘n wash self car washes

  • Select the high-pressure soap. Soap the car down (never use the provided brushes especially on the paint!). Rinse car off with the high-pressure rinse. Dry with clean microfiber towels.

Car washes

  • Touch-less car washes only. Never use a car wash with brushes! Never select the “spray wax” option.

Drying

  • System X Renew™ is a great drying aid. Using Renew™ and one damp microfiber to first dry the vehicle then follow by using the second microfiber to finish drying. This process will give you the best results.
  • Always dry completely and never leave to “air” dry. Tap water contains minerals that may leave deposits creating water spots.
  • Only use quality microfiber towels for best results and avoid aggressive wiping, allowing the material to absorb the water.

Spot Removal

  • Never use aggressive products to polish the coating or remove surface contamination.
  • Never use excessive force to remove spots.
  • Bird droppings, tar, sap, etc. should be removed as soon as possible to avoid temporary staining or hardening on the coating. Any staining left behind from bird droppings will break down over a few days without affecting the coating.

After Washing

Do not wax the coating, many products contain solvents and abrasives.  System X Renew™ is the recommended maintenance and aftercare product. Ask your local installer about purchasing System X Renew™ during your visit or order online.

Automated Washing

Always go to a touch-free wash! Using an automated car wash with brushes will void your warranty. System X® takes 2-3 days to achieve full hardness. Please handle with care and do not wash the vehicle for the first 2 weeks.

Annual Inspections

Annual Inspections are the recommended process for ensuring the coating is maintained and care for the vehicle is properly executed. Annual inspections should be carried out by an approved applicator within 30 days before the anniversary date of the last service to ensure peak performance and warranty validity. Although durable and long-lasting, annual inspections ensure maximum gloss and protection from System X® coatings.

Ready to Try the Best Ceramic Coating in the World?

GET A FREE QUOTE